USA-Made

LeaderTech

O-Rings O Cross Section

O-Rings for EMI/RFI Shielding Applications

O-Rings from Leader Tech include TechSIL round profile molded EMI/RFI shielding solutions designed for precise sealing and reliable performance. These O-Rings are available in over fifty sizes to fit a wide range of applications.

They feature cross sections ranging from .030” to .139” and inside diameters from .145” to 3.987”. In addition, TechSIL O-Rings can be molded using all sixteen standard compounds to meet different performance requirements.

Flexible Design and Material Options

These O-Rings can be used with or without a groove, depending on your design needs. As a result, they offer flexibility for various installation methods.

Additional sizes and custom compound options are also available upon request to support specific applications.

Precision Tolerances for Reliable Performance


Leader Tech O-Rings are manufactured with precise tolerances to ensure consistent performance. Tolerances on dimension B are ±.003″ for diameters of .070″ and below, and ±.005″ for diameters from .071″ to .200″.

For dimension C, tolerances are ±.010″ for parts up to 1.500″, ±.015″ for parts from 1.500″ to 2.500″, and ±.020″ for parts up to 4.500″. Therefore, these O-Rings provide dependable sealing across different sizes and applications.

O-Rings

Total Mass Loss (TML): In general, the material is considered acceptable if the total mass loss (TML) is less than 1% and the volatile condensable mass (VCM) is less than
0.1% of the initial sample mass.
Collected Volatile Condensable Materials (CVCM): If the CVCM exceeds 0.1%, the material fails.
Water Vapor Regained (WVR): If the difference between the TML and the WVR does not exceed 1.0% (and the CVCM does not exceed 0.10%), the material passes the test.

×

Rep Firm

Office Closure.

In observance of the Labor Day holiday, our office will be closed on Monday, September 7th.

We will resume normal business hours on Tuesday, September 8th at 8 am EST.

We will get back to your inquiries as soon as possible.