USA-Made

LeaderTech

O-Rings D Cross Section

Conductive Elastomer O-Rings D Cross Section

TechSIL EMI/RFI Shielding Conductive Elastomer “D” Profile Molded O-Rings come in nine different sizes.

They come with foot prints ranging from .078” to .240” and have Inside Diameters ranging from .410” to 3.910”. TechSIL molded parts can be molded out of all sixteen standard compounds.

The O-Rings D Cross Section can be used with or without a groove. Additional sizes and compounds are available upon request.

O-Rings D Cross Section

Total Mass Loss (TML): In general, the material is considered acceptable if the total mass loss (TML) is less than 1% and the volatile condensable mass (VCM) is less than
0.1% of the initial sample mass.
Collected Volatile Condensable Materials (CVCM): If the CVCM exceeds 0.1%, the material fails.
Water Vapor Regained (WVR): If the difference between the TML and the WVR does not exceed 1.0% (and the CVCM does not exceed 0.10%), the material passes the test.

×

Rep Firm