40+ Years of EMI/RFI Shielding Expertise
RF Shielding Solutions for Electronic Applications
Control unwanted radio frequency interference with reliable RF shielding materials and solutions designed for electronic systems, enclosures, circuit boards and high-frequency applications.
Leader Tech provides RF shielding solutions that help reduce unwanted electromagnetic energy, protect sensitive electronics and maintain signal integrity. Our portfolio includes enclosure shielding, board-level shielding, conductive materials, ferrites and microwave absorber technologies for a wide range of RF applications.
RF & EMI Shielding Solutions
High-Frequency Applications
Standard & Custom Products
Engineering Support
What Is RF Shielding?
RF shielding uses conductive, magnetic or absorbing materials to control unwanted radio-frequency (RF) energy.
Electronic devices can both generate and receive RF energy. If this energy is not controlled, it can interfere with sensitive circuits, reduce signal quality, or affect nearby equipment.
Depending on the material and design, shielding can reflect, absorb or redirect electromagnetic energy.
For example, this protection can be added at different points in an electronic system:
- Electronic enclosures
- Circuit boards
- Connectors and I/O interfaces
- Cables and wire assemblies
- Antenna systems
- RF modules
- Access panels and enclosure seams
- Internal cavities
Therefore, the right solution depends on the frequency, enclosure design, materials, openings, grounding and installation method.
For this reason, the complete system should be considered when selecting a shielding solution.
How Does RF Shielding Work?
Shielding controls electromagnetic energy as it reaches a conductive or absorbing barrier.
For example, a conductive enclosure can help stop RF energy from entering or leaving an electronic system. However, gaps, seams, connectors and cables can create paths for unwanted energy.
Depending on the material and application, the energy may be reflected at the surface or absorbed within the material.
Important factors include:
- Operating frequency
- Required shielding effectiveness
- Material conductivity
- Material thickness
- Shield design and geometry
- Enclosure openings
- Grounding and electrical continuity
- Distance from the RF source
- Installation method
- Environmental conditions
In addition, high-frequency applications can be more sensitive to small gaps.
As a result, the shielding design should be considered as part of the complete RF system.
Types of EMI Shielding Materials
Board-level shields help isolate sensitive electronic circuitry directly at the PCB level. They can help contain electromagnetic emissions generated by components while protecting circuitry from nearby RF and electromagnetic sources.
Leader Tech offers standard, modified-standard and custom board-level shielding configurations for different PCB layouts and application requirements.
Cables and wires can conduct or radiate unwanted high-frequency energy. Ferrite components provide a practical way to suppress unwanted electromagnetic noise on cables without redesigning the entire electronic system.
Leader Tech offers ferrite solutions for cables, wires and flex circuits, including configurations designed for different frequency ranges.
Electronic enclosures often require shielding around seams, doors, covers, ventilation openings and other potential leakage points.
Leader Tech’s enclosure shielding portfolio includes conductive elastomers, fingerstock gaskets, conductive fabric shielding gaskets, oriented wire products, knitted wire gaskets and other shielding solutions.
Microwave absorbers help control electromagnetic energy by converting unwanted electromagnetic energy into heat rather than simply reflecting it.
Leader Tech offers narrowband and broadband absorber technologies for applications such as cavity resonance, antenna isolation, cross-talk reduction, instrument housings, EMI shields and RF test equipment.
Thermal solutions help move heat away from sensitive components and support reliable performance. Leader Tech offers gap fillers and high-performance graphene, indium, and carbon fiber materials for demanding electronic applications.
View Products →
Our custom metal fabrication capabilities support projects from design and prototyping through high-volume production. We manufacture precision components based on your electrical, mechanical, and dimensional requirements.
View Products →
RF Shielding vs. EMI Shielding
RF shielding and EMI shielding are closely related. However, they are not exactly the same.
First, EMI, or electromagnetic interference, is a broad term for unwanted electromagnetic energy.
In contrast, RF, or radio frequency, refers to electromagnetic energy within radio-frequency ranges.
As a result, RF protection is often part of a broader EMI/RFI shielding strategy.
For example:
- An electronic enclosure may need EMI/RFI protection.
- A wireless device may need local shielding around sensitive circuits.
- A cable may need ferrite components to reduce RF noise.
- A microwave system may use absorber materials to control unwanted energy.
Therefore, the best approach depends on the frequency, source and location of the interference.
Where Is RF Shielding Used?
RF shielding is used wherever unwanted radio-frequency energy can affect equipment performance, signal quality or electromagnetic compatibility.
Telecommunications Equipment
Shielding helps reduce unwanted electromagnetic coupling in wireless and telecommunications equipment.
Wireless Devices
For example, mobile and connected devices may use local shielding to protect sensitive circuits from unwanted RF energy.
Aerospace & Defense Electronics
These systems may require carefully designed shielding and absorber materials to control interference in demanding environments.
Medical Electronics
Similarly, sensitive medical equipment can use shielding to reduce interference and help maintain reliable operation.
Test & Measurement Equipment
Shielding helps reduce external interference and unwanted emissions in sensitive measurement systems.
Industrial Electronics
In addition, industrial control and automation equipment can use shielding to reduce interference in electrically noisy environments.
Data & Networking Equipment
High-speed digital systems can generate unwanted RF energy. Therefore, enclosure, board-level and cable solutions can help control this interference.
Radar & Microwave Systems
Finally, absorber materials can help with antenna isolation, cavity resonance and unwanted microwave energy.
How to Choose an RF Shielding Solution
Choosing the right solution requires looking at both the electrical needs of the application and its physical design.
1. Identify the Frequency
First, determine the frequency range that needs to be controlled.
Performance can vary across different frequencies. Therefore, this is an important starting point.
2. Identify the RF Source
Next, determine where the unwanted energy is coming from:
- Circuit
- Cable or wire
- Antenna
- External equipment
- Enclosure opening
- Internal cavity
3. Define the Required Shielding Performance
Then, determine how much attenuation is needed and identify any applicable performance or compliance requirements.
4. Identify the Shielding Location
Next, determine where protection is required:
- PCB
- Component
- Cable
- Connector
- Enclosure
- Internal cavity
5. Check Openings and Seams
Doors, access panels, vents and connector openings can reduce overall performance.
Therefore, these areas should be included when designing the shielding system.
6. Select the Material
When selecting a material, consider its:
- Conductivity
- Permeability
- Thickness
- Frequency range
- Weight
- Flexibility
- Environmental resistance
7. Consider Mechanical Requirements
In addition, the solution should match the physical design.
Consider compression, movement, repeated opening and closing, available space and installation method.
8. Decide Between Absorption and Reflection
In some cases, reflecting unwanted energy away from sensitive components is appropriate.
In other cases, absorbing the energy can provide better control.
9. Evaluate the Complete System
Finally, look at the complete design rather than one component alone.
Cables, connectors, vents, seams, grounding and enclosure geometry can all affect overall shielding performance.
Why Choose Leader Tech for RF Shielding?
40+ Years of Experience: Leader Tech brings decades of experience in EMI/RFI shielding for demanding electronic applications.
Complete RF Shielding Portfolio: In addition, our portfolio includes board-level shields, enclosure shielding, ferrites, conductive materials and RF absorber technologies.
Standard & Custom Solutions: Whether you need a standard product or a custom design, we can help develop a solution around your specific RF requirements.
Engineering Support: Finally, our team can provide practical guidance on material selection, frequency requirements and shielding design.
Frequently Asked Questions About RF Shielding
What is RF shielding?
RF shielding is the use of conductive, magnetic or absorbing materials and structures to control unwanted radio-frequency electromagnetic energy.
Why is RF shielding important?
RF shielding can help prevent unwanted electromagnetic energy from interfering with sensitive electronics, degrading signal quality or creating unwanted emissions.
What materials are used for RF shielding?
Common materials include copper, aluminum, steel, nickel-based conductive fabrics, conductive elastomers, conductive foams and other metal shielding materials. RF absorber materials can also be used when unwanted RF energy needs to be absorbed.
What is the difference between RF shielding and EMI shielding?
RF shielding specifically addresses radio-frequency electromagnetic energy, while EMI shielding is a broader term covering electromagnetic interference across a wider range of frequencies.
How effective is RF shielding?
RF shielding effectiveness depends on frequency, material properties, thickness, enclosure geometry, seams, openings, grounding and installation. A shielding material should therefore be evaluated as part of the complete system.
Does RF shielding block radio signals?
RF shielding can reduce the transmission of RF energy, but the amount of attenuation depends on the shielding material, frequency and enclosure design.
What is RF absorber material?
RF absorber material is designed to absorb unwanted RF or microwave energy and convert a portion of that energy into heat. It can be used for applications such as cavity resonance control, antenna isolation and RF noise reduction.
Can RF shielding be used on circuit boards?
Yes. Board-level RF shielding can isolate sensitive components and circuit sections from unwanted electromagnetic coupling.
Can RF shielding be used around cables?
Yes. Ferrite cable shielding components can suppress unwanted high-frequency noise on cables, wires and connectors.
What RF shielding solution should I use?
The correct solution depends on the operating frequency, source of interference, required shielding effectiveness, physical location, mechanical requirements and environmental conditions.
Does Leader Tech provide custom RF shielding?
Yes. Leader Tech provides standard and custom shielding solutions and engineering support for application-specific requirements.