Hollow D

TechSIL Solid and Hollow “D” EMI/RFI Shielding Conductive Elastomer Extrusions are available in nineteen different profiles. They can be used in a groove to control the compression forces or can have either Conductive or non-Conductive Pressure Sensitive Adhesive applied for easy assembly. When using a non-Conductive Adhesive only 50% of the mating surface should have PSA applied. Both the Solid and Hollow variations can be bonded into O-Rings or Picture Frame gaskets using an RTV cold bond or a Hot Vulcanized bond. The Hollow “D” profiles offers a much wider operating range and lower compression forces are required than for the Solid versions. Additional sizes are available upon request.

Hollow P

TechSIL EMI/RFI Shielding Conductive Elastomer Hollow “P” Extrusions are available in eight different sizes. They can be used in a groove to control the compression forces or can have either Conductive or non-Conductive Pressure Sensitive Adhesive applied for easy assembly. When using a non-Conductive Adhesive only 80% of the mating surface should have PSA applied. PSA can be applied to either side of the gasket so that it can be used in several different positions on your device. Hollow “P” extrusions can be bonded into Picture Frame gaskets using an RTV cold bond or a Hot Vulcanized bond. The Hollow “P” profiles offers a wide operating range and low compression force. Solid versions and additional sizes are available upon request.

U Channel

TechSIL EMI/RFI Shielding Conductive Elastomer “U” Channel Extrusions come in six different sizes with multiple thicknesses and widths to fit your application. Conductive and non-Conductive Pressure Sensitive Adhesives can be applied to the strips for easy assembly if desired. When using a non-Conductive Adhesive only 50% of the mating surface should have PSA applied. Additional widths and thicknesses are available upon request.

Slot Mount Series

Slot mount gaskets are a standard in the electronic enclosure industry. These gaskets are used in shorter lengths as ESD contacts and longer lengths as EMI gaskets, which clip into slots or slide onto mounted tracks.

Adhesive Mount Series

The AH series gaskets are adhesive mounted general-purpose gaskets used in both compression and wiping applications. Sizes range from .11” (2.8mm) to .32” (8.1 mm) in height.

Applications include electronic enclosures, shielded cabinets, and MRI chamber doors.

XX – Select material/finish

Dome Top Series

The Dome Top Gaskets are known for their large surface area for electrical contact and smooth wiping action. Also available in a solid top profile allowing for omni-directional wiping. Together with the Slot Mount Series, the Dome Top Gaskets are a mainstay in the enclosure/chassis industries. Commonly mounted with adhesive tape.

Low Profile Series

The low profile series gaskets incorporate design features that allow for some of the lowest compression forces in the industry, while achieving high performance shielding effectiveness. These gaskets are ideally suited for small aperture applications.

XX – Select material/finish (see page 6)

Compact PCI Series

High performance Compact PCI Gaskets designed for easy card insertion in rack mount applications. This gasket is available in two different sizes to accommodate different customer extrusions. They are available in both Copper Beryllium and Stainless Steel.

Folded Series

Leader Tech’s Folded Gasket series are industry standard, general-purpose gaskets that allow a large range of deflection and compression forces. These gaskets are available with or without
tape for alternate attachment methods. Also available in a snag-free version where, under compression, the leading edge of the gasket slides into an extended and folded base which prevents possible damage to the gasket.

Twist Series

The Twist series gaskets are designed for demanding compression applications. This series can compress to material thickness and provide excellent shielding performance. Profiles include
standard flat, right angle, double twist, and clip-on.

Clip-On Series

The Clip-On Gaskets are used in enclosures, shielded cabinets, and on circuit cards as ESD contacts and EMI gaskets.
For edge mount applications, close attention must be given to clip size, lance requirements, deflection parameters and finger configuration. Leader Tech provides application assistance in the development of specifications.

Contact Series

Contact gaskets are primarily used for grounding and shielding in high frequency applications. These gaskets provide engineers and designers with flexibility to solve their shielding and grounding issues. They are available in a variety of different lengths, widths and profiles. Standard factory length for Contact Series strips is 16″. Individual contacts available in tape & reel packaging. Adhesive tape is optional – please consult factory.

One Piece Surface Mount Shields

One-Piece SMS Surface Mount PCB Shield

Leader Tech SMS – Surface Mount PCB Shields offer a highly reliable, cost effective, off-the-shelf solution for most surface mount shielding applications. Our SMS shields are supplied in tape & reel packaging and are suited for any volume application including automated pick and place assembly operations.

Leader Tech has more sizes and heights of standard off-the-shelf shields than any other supplier.

Our one piece SMS style PCB Shields can be specified for applications that require no inspection or repair of shielded elements.  If tuning or inspection is required try our two piece SMS shields.

If you would like a detailed drawing of any of the SMS series just click on the part number and a full drawing will appear with the recommended solder trace dimensions.

 

Two Piece Surface Mount Shields

Two-Piece SMS Surface Mount PCB Shield

Leader Tech SMS – Surface Mount Shields offer a highly reliable, cost effective, off-the-shelf solution for most surface mount shielding applications. Our SMS shields are supplied in tape & reel packaging and are suited for any volume application including automated pick and place assembly operations.

Leader Tech has more sizes and heights of standard off-the-shelf shields than any other supplier.

Our two piece SMS style PCB Shield can be specified for applications that require inspection, tuning or repair of shielded elements. If tuning or inspection is not required try our cost saving one piece SMS shields.

If you would like a detailed drawing of any of the SMS series just click on the part number and a full drawing will appear with the recommended solder trace dimensions.