Home » Enclosure Shielding » Fabric & Foam » Shielding Fabrics
Shielding effectiveness is determined by a combination of the reflection and absorption of RF signals. Absorption depends on the thickness of the shield material. However, reflection occurs at the shield surface and its effectiveness is independent of thickness. Reflection is the determining factor for all high frequency signal attenuation. (Note: When using these materials for conductive shielding gaskets, conductivity is the determinant.) Maximum reflection occurs with the highest conductivity materials – the best being copper, nickel and combinations of both.
Leader Tech Part Number | Material | Thickness (in) | Width (in) | Length (in) | Adhesive | Resistivity (Ohms/Square) | Attenuation (dB@500kHz) | Attenuation (dB@100MHz) | Attenuation (dB@300MHz) | Attenuation (dB@1GHz) |
---|---|---|---|---|---|---|---|---|---|---|
Leader Tech Part Number | Material | Thickness (in) | Width (in) | Length (in) | Adhesive | Resistivity (Ohms/Square) | Attenuation (dB@500kHz) | Attenuation (dB@100MHz) | Attenuation (dB@300MHz) | Attenuation (dB@1GHz) |
SF005PCN | Conductive CuNi Cloth | 0.003 | 41 | 36 | No | 0.005 | 79 | 81 | 86 | 82 |
SF005PCN-CA | Conductive CuNi Cloth | 0.003 | 41 | 36 | Conductive PSA | 0.005 | 79 | 81 | 86 | 82 |
SF005PCN-HM | Conductive CuNi Cloth | 0.003 | 41 | 36 | Hot Melt | 0.005 | 79 | 81 | 86 | 82 |
SF030PCU | Conductive Cu Cloth | 0.003 | 41 | 36 | No | 0.035 | 60 | 67 | 65 | 62 |
SF030PCU-CA | Conductive Cu Cloth | 0.003 | 41 | 36 | Conductive PSA | 0.035 | 60 | 67 | 65 | 62 |
SF030PCU-HM | Conductive Cu Cloth | 0.003 | 41 | 36 | Hot Melt Adhesive | 0.035 | 60 | 67 | 65 | 62 |
SF050PNI | Conductive Ni Cloth | 0.004 | 41 | 36 | No | 0.05 | 60 | 72 | 67 | 63 |
SF050PNI-CA | Conductive Ni Cloth | 0.004 | 41 | 36 | Conductive PSA | 0.05 | 60 | 72 | 67 | 63 |
SF050PNI-HM | Conductive Ni Cloth | 0.004 | 41 | 36 | Hot Melt Adhesive | 0.05 | 60 | 72 | 67 | 63 |
Leader Tech Part Number | Material | Thickness (mm) | Width (mm) | Length (mm) | Adhesive | Resistivity (Ohms/Square) | Attenuation (dB@500kHz) | Attenuation (dB@100MHz) | Attenuation (dB@300MHz) | Attenuation (dB@1GHz) |
---|---|---|---|---|---|---|---|---|---|---|
Leader Tech Part Number | Material | Thickness (mm) | Width (mm) | Length (mm) | Adhesive | Resistivity (Ohms/Square) | Attenuation (dB@500kHz) | Attenuation (dB@100MHz) | Attenuation (dB@300MHz) | Attenuation (dB@1GHz) |
SF005PCN | Conductive CuNi Cloth | 0.076 | 1041.4 | 914.4 | No | 0.005 | 79 | 81 | 86 | 82 |
SF005PCN-CA | Conductive CuNi Cloth | 0.076 | 1041.4 | 914.4 | Conductive PSA | 0.005 | 79 | 81 | 86 | 82 |
SF005PCN-HM | Conductive CuNi Cloth | 0.076 | 1041.4 | 914.4 | Hot Melt | 0.005 | 79 | 81 | 86 | 82 |
SF030PCU | Conductive Cu Cloth | 0.076 | 1041.4 | 914.4 | No | 0.035 | 60 | 67 | 65 | 62 |
SF030PCU-CA | Conductive Cu Cloth | 0.076 | 1041.4 | 914.4 | Conductive PSA | 0.035 | 60 | 67 | 65 | 62 |
SF030PCU-HM | Conductive Cu Cloth | 0.076 | 1041.4 | 914.4 | Hot Melt Adhesive | 0.035 | 60 | 67 | 65 | 62 |
SF050PNI | Conductive Ni Cloth | 0.102 | 1041.4 | 914.4 | No | 0.05 | 60 | 72 | 67 | 63 |
SF050PNI-CA | Conductive Ni Cloth | 0.102 | 1041.4 | 914.4 | Conductive PSA | 0.05 | 60 | 72 | 67 | 63 |
SF050PNI-HM | Conductive Ni Cloth | 0.102 | 1041.4 | 914.4 | Hot Melt Adhesive | 0.05 | 60 | 72 | 67 | 63 |
Leader Tech is a world leading innovator and manufacturer of EMI shielding products for circuit boards, electronic enclosures, thermal products, microwave absorbers and interconnect cables.